Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: jdave on March 21, 2008, 12:23:19 pm

Title: Problem while programming LPC952 using Flash magic 4.15
Post by: jdave on March 21, 2008, 12:23:19 pm
I am trying to program LPC952 using flash magic.  I am using keil to program.

I am able to erase the device but it is not progrmming the flash.

following is the message in the keil message window.

"FM.EXE" "DEVICE(P89LPC952,18.0) ERASE(DEVICE,PROTECTISP) HEXFILE("H:\Projects\Venaflow MOD 8\Examples\NXP LPC954\Mod8_0_1_1\Mod8_1.HEX",NOCHECKSUMS,NOFILL,PROTECTISP) COM(3,9600) HARDWARE(KEILMCB900)"
Flash Magic Version 4.15.270
8051/XA Driver Version 2.41.267
ARM Driver Version 1.41.267
(C) Embedded Systems Academy 2000-2008 All rights reserved
NON PRODUCTION USE ONLY
Connected
Device selected
Erase complete (DEVICE)

please advice.
Title: Re: Problem while programming LPC952 using Flash magic 4.15
Post by: jdave on March 21, 2008, 03:02:12 pm
found the problem and solution too.  i had pull up on RST, removed it and its working.
Title: Re: Problem while programming LPC952 using Flash magic 4.15
Post by: Andy Ayre on March 24, 2008, 09:24:10 am
Thanks for posting the solution - it is much appreciated.

Andy