Flash Magic Forum

In-System Programming Support => P89C51Rx+/P89C51Rx2/P89C66x/P89C6xX2/P89V66x => Topic started by: raigo176 on July 18, 2008, 05:50:32 AM

Title: P89C664 trouble, desktop pc vs laptop
Post by: raigo176 on July 18, 2008, 05:50:32 AM
Hello,
i am having trouble with the P89C664. When i use my desktop PC it works fine, i am able to program the device. When i try to use it on my laptop with exactly the same setting it just does not work. It says something like that: "Unable to connect at the specified baud rate. Try reducing baud rate. Reset the hardware into ISP mode again". It cannot find the device. Both computers use Windows XP. I also use a USB->R232 converter on both computers. Where could the problem be? Btw, reducing baud rate does not work, i have also tried changing COM port numbers.

ty
Title: Re: P89C664 trouble, desktop pc vs laptop
Post by: Andy Ayre on July 18, 2008, 10:24:12 AM
Are you using the exact same USB to RS232 cable? They are frequency a cause of problems.

Andy
Title: Re: P89C664 trouble, desktop pc vs laptop
Post by: Jan Waclawek on July 23, 2008, 12:13:02 AM
Quote from: Andy Ayre on July 18, 2008, 10:24:12 AM
Are you using the exact same USB to RS232 cable? They are frequency a cause of problems.
Also, a different driver to that "cable" might make a significant difference...

JW