Print Page - Wiring Diagram for LPC1752

Title: Wiring Diagram for LPC1752
Post by: benedict on October 19, 2009, 08:29:44 PM

Hi,

Anyone can help me with the wiring diagram of the interface between PC host and LPC1752 using flashmagic production system software? Thanks very much. :)

Benedict

Title: Re: Wiring Diagram for LPC1752
Post by: Andy Ayre on October 19, 2009, 09:15:28 PM

You need to place an RS232 transceiver between UART0 and the PC COM port. For example MAX232 and family.

You will then need to make sure you meet the conditions in the LPC1xxx user manual to start the bootloader. See the chapter on the Flash memory.

Andy

Flash Magic Forum

In-System Programming Support => ARM Cortex => Topic started by: benedict on October 19, 2009, 08:29:44 PM