Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: quispe on May 11, 2011, 07:57:17 PM

Title: Problem using Flash Magic with LPC935
Post by: quispe on May 11, 2011, 07:57:17 PM
I am using FM with LPC935 and was all correct but after one day it stop working. I know that LPC must have three negative pulses on RST pin after VCC goes high, but I put an Oscilloscope and I can't vew it any more, anyone can give me some help? I have replace the microcontroller for a new one and it does not work.

Please view the picture above

(http://img84.imageshack.us/img84/4199/fmerror.th.jpg) (http://imageshack.us/photo/my-images/84/fmerror.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
Title: Re: Problem using Flash Magic with LPC935
Post by: Andy Ayre on May 12, 2011, 03:09:43 AM
Make sure you have the option to use DTR and RTS to enter ISP mode enabled in the advanced options.

Andy