Text only
|
Text with Images
Flash Magic Forum
In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: shin on June 14, 2011, 11:31:40 AM
Title:
LPC936 EEPROM Erasing using command line (FM.EXE)
Post by:
shin
on
June 14, 2011, 11:31:40 AM
Is it possible to erase LPC936 EEPROM area using FM command line? If yes, how should be the command?
TKS.
Title:
Re: LPC936 EEPROM Erasing using command line (FM.EXE)
Post by:
Andy Ayre
on
June 15, 2011, 01:00:31 AM
The 89LPC936 bootloader does not provide commands to access the EEPROM, therefore Flash Magic cannot access it.
Andy
Text only
|
Text with Images