Flash Magic Forum

In-System Programming Support => ARM Cortex => Topic started by: msbechtold on December 16, 2013, 02:18:46 PM

Title: LP1759 does not work in the command line
Post by: msbechtold on December 16, 2013, 02:18:46 PM
C:\Program Files (x86)\Flash Magic>fm COM(5, 115200) DEVICE(LPC1759, 0.000000) HARDWARE(BOOTEXEC, 50, 100) ERASE(DEVICE, PROTECTISP) HEXFILE(Z:\XS26\Firmware\1.0.76r6082\XS26.MicroABRelb76r6082.hex, NOCHECKSUMS, NOFILL, PROTECTISP)
Flash Magic Version 7.67.3377
8051/XA Driver Version 3.04.3296
ARM UART Driver Version 3.11.3302
ARM Cortex UART Driver Version 4.64.3377
ARM Ethernet Driver Version 2.05.3296
ARM Cortex Ethernet Driver Version 2.07.3296
ARM CAN Driver Version 2.11.3296
(C) Embedded Systems Academy 2000-2013 All rights reserved
NON PRODUCTION USE ONLY

ERROR: Invalid parameters for DEVICE directive: DEVICE(LPC1759, 0.000000)
Title: Re: LP1759 does not work in the command line
Post by: Andy Ayre on December 18, 2013, 07:09:58 AM
You are not using the DEVICE directive correctly. Please see the description in the manual for details of the third parameter.

Andy