Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: yasingol on April 12, 2016, 06:33:53 am

Title: lpc925 programs
Post by: yasingol on April 12, 2016, 06:33:53 am
I have LPC925 AND I USing flashmagic software

I HAVE USBTORS232 CONVERTER  WHIC PINS CONNECTED TO    RX,TX AND RESET ON THE  LPC925

WHAT İS THE BAUDRATE   AND INTERNAL OSILATOR VALUE

DO YOU HAVE DATASHEET

PLEASE HELP ME

 
Title: Re: lpc925 programs
Post by: Andy Ayre on April 13, 2016, 02:30:27 am
Please don't write in capitals - it is the internet version of shouting at people.

Please see the schematic of the MCB900 board on keil.com.

Start with a baudrate of 7200.

The data sheet and user manual are available from www.nxp.com/microcontrollers.
Title: Re: lpc925 programs
Post by: yasingol on April 15, 2016, 02:04:12 am
thanks but ı AM NOT USE mcb900 board
is it possible wihtout mcb900 board?

Title: Re: lpc925 programs
Post by: Andy Ayre on April 15, 2016, 02:20:39 am
Of course. Just because a company puts the schematics of their board on their website for free, doesn't mean you have to buy their board.