Flash Magic Forum

In-System Programming Support => ARM Cortex => Topic started by: thiagorod on October 16, 2018, 09:41:32 am

Title: Firmware not loading after flashing
Post by: thiagorod on October 16, 2018, 09:41:32 am
Hello,

Sorry for this question, Im new at LPC11xx family (used to AVR), but I am trying to flash a firmware that was compiled under LPCXpresso  V8.2.2 (source code provided by NXP), and the .HEX file also generated by LPCXpresso.

I was able to flash it using Flash Magic v.11.20, Im using LPC1112/102 with the configurations in the screenshot.

But it seems like the firmware is not being executed after a hard reset, even with the the ISP pin high. Am I missing a config in Flash Magic?

The source code/project is this one:  https://community.nxp.com/docs/DOC-330476
I designed my own PCB following their design.



Regards,