Default programming of BOOTSTAT on P89LPC932A1

[Philip Garman]

If BOOTSTAT (Default: 0x01) is not specified in the HEX file, does Flashmagic turn this bit off automatically so that user code will execute?

Thanks
P

[Andy Ayre]

Are you referring to the special record at FFF0H for the LPC9xx family? If so that bit is ignored, along with the boot vector.

Flash Magic always clears the status bit/byte after programming a hex file to ensure that on the next reset the code will run.

[Philip Garman]

Ok, you answered my question.  Thanks!