Author Topic: programming the LCP901 with MCB900 - CRC wrong  (Read 2688 times)

Josef

  • Guest
programming the LCP901 with MCB900 - CRC wrong
« on: October 07, 2005, 07:35:17 am »
Has anybody experience with that?
I am using the MCB900 Ver2.0 eval-Board with an adapter PAB90x-1 to load the LPC901 with Flash Magic 2.40 (and 2.36).
The CRC of the code in the flash and the original hex file do not match, however the code does execute on the eval-board (but instable and only with the external crystal). If I insert the

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2160
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: programming the LCP901 with MCB900 - CRC wrong
« Reply #1 on: October 10, 2005, 10:36:52 am »
Are you doing a full device erase first? After a full erase what are the CRCs? They should be zero for all blocks.

Embedded Systems Academy, Inc.
support at esacademy dot com