Author Topic: Programing a LPC2294  (Read 3891 times)

deep5811

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
Programing a LPC2294
« on: August 31, 2006, 09:44:30 am »
I was just wondering if it is possible for me to retrieve flash and program flash from the LPC2294 using the Flash Magic software.  The only way i can talk to the processor is through the debugger port.  Any help is greatly appreciated.  Thank you.

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2156
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Programing a LPC2294
« Reply #1 on: August 31, 2006, 09:51:22 am »
Flash Magic works with the ISP bootloader, which uses an on-chip UART. If you can connect to it and the code read protection is not enabled, then you can save the contents of flash as a hex file using FM.

Embedded Systems Academy, Inc.
support at esacademy dot com