Author Topic: LPC2132 Hex File Program Error  (Read 6313 times)

njwork

  • Jr. Member
  • **
  • Posts: 6
    • View Profile
LPC2132 Hex File Program Error
« on: September 14, 2006, 08:24:15 pm »
In MY Lpc2132 Hex file  first line is
:020000040000FA
:1030000018F09FE518F09FE518F09FE518F09FE590
....
program from 0x3000 start ,but Used flash magic program at 0x0000-0x0001 Address Write 00 00 code .
    my hex file first line is
         :020000040000FA

   not is
        :020000000000FE

please help me !

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2165
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC2132 Hex File Program Error
« Reply #1 on: September 15, 2006, 07:05:52 am »
This should be fixed in the latest version. Please try it and let me know.

Embedded Systems Academy, Inc.
support at esacademy dot com

njwork

  • Jr. Member
  • **
  • Posts: 6
    • View Profile
Re: LPC2132 Hex File Program Error
« Reply #2 on: September 15, 2006, 06:39:08 pm »
I'm using Flash Magic (V3.27.130) .ARM Driver Version 1.13.128
I  Try it  again ,error again .

Lpc2132 Hex file first line is
:020000040000FA
:1030000018F09FE518F09FE518F09FE518F09FE590
....

so i now  write a program delete Hex First Line Then Program .

problem 2

Erase lpc2132 block 8 Used Erase(0x80,protectisp) ,result Ok!
but Erase lpc2132 block 9 Used Erase(0x100,protectisp) ,result error!
Soft Display:
ERROR: Invalid parameters for ERASE directive: erase(0x100,protectisp)

so I only use ERASEUSED(c:\tst.hex,PROTECTISP

Author: Andrew Ayre
Date:   09-15-06 11:29

The ERASE command recently changed. The first parameter should be the number of the block (0 to n). Make sure you are using the latest version of FM.

now i try it ,my command line is
"C:\Program Files\Flash Magic\FM.EXE" "COM(1,57600) DEVICE(LPC2132,11.59200) ERASE(1,PROTECTISP)  HEXFILE("C:\TEMP\Host.HEX",NOCHECKSUMS,NOFILL,PROTECTISP) "

lpc2132 have 9 blocks,I Use Fm  command  ERASE(1,PROTECTISP) result erase flash 0x00-0xfff. block 1
ERASE(2,PROTECTISP) erase 0x1000-0x1fff    block 2
ERASE(4,PROTECTISP) erase 0x2000-0x2fff block 3
but  ERASE(3,PROTECTISP) erase 0x0000-0x1fff   (block 1 2)
so analogically I Erase block 9 Used  ERASE(0x100,PROTECTISP) but error

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2165
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC2132 Hex File Program Error
« Reply #3 on: September 19, 2006, 01:54:26 pm »
Both these problems will be fixed in the next release (3.28), which should be available this week. Thanks for letting us know!

Embedded Systems Academy, Inc.
support at esacademy dot com