Erase(0x100,protectisp) LPC2132 BLOCK 8 Error!

Started by njwork, September 14, 2006, 11:19:34 PM

Previous topic - Next topic

njwork

Erase lpc2132 block 8  Used Erase(0x80,protectisp)  ,result Ok!
 but Erase lpc2132 block 9  Used Erase(0x100,protectisp)  ,result error!
  Soft Display:
ERROR: Invalid parameters for ERASE directive: erase(0x100,protectisp)

so I only use ERASEUSED(c:\tst.hex,PROTECTISP)  erase ;

Andy Ayre

The ERASE command recently changed. The first parameter should be the number of the block (0 to n). Make sure you are using the latest version of FM.

Embedded Systems Academy, Inc.
support at esacademy dot com