Author Topic: FlashMagic Terminal Overrun buffer  (Read 6442 times)

Je Gold

  • Full Member
  • ***
  • Posts: 135
    • View Profile
FlashMagic Terminal Overrun buffer
« on: July 22, 2007, 04:38:36 am »
Hi Andy,

I modified the Keil Blinky MCB2130 (LPC2138) ADC program and had the LPC2138 spit the ADC results out very frequently.

It seems the buffer in Terminal section of FlashMagic may get over run...

Buad Rate  9600 N,8,1. Keil code attached

The LPC2138 continually spits out  printf ("\nAIN0 Result = 0x%03X", val);

==> It takes a while for the terminal program to process and display the in coming data.

Just thought I would let you know.


Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2165
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: FlashMagic Terminal Overrun buffer
« Reply #1 on: July 23, 2007, 09:36:38 am »
The terminal in Flash Magic is horribly slow. Unfortunately there isn't much I can do about it without a significant re-write of code.

Embedded Systems Academy, Inc.
support at esacademy dot com