Author Topic: 89c51re2  (Read 6183 times)

xtracool_protik

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
89c51re2
« on: March 27, 2008, 12:39:28 am »
Hello Guys,
 This is my first time to use ISP and I am looking towards flashmagic, However when I looked in supported device list there was no 89C51RE2 so wanted any of you to guide me about it. I'm using 89c51RE2 because it have 2 serial ports which is must in my case.
 Thank you in advance.

Jan Waclawek

  • Full Member
  • ***
  • Posts: 220
    • View Profile
    • EFTON homepage
Re: 89c51re2
« Reply #1 on: March 27, 2008, 01:06:04 am »
It is vital always to use the full marking of the part, including the prefix (OK you might omit the suffixes denoting the package/temperature grade).
There is no Philips/NXP made chip with RE2 suffix; and FlashMagic is a NXP-sponsored project, aimed at programming NXP-chips. You are most probably talking about Atmel's AT89C51RE2, for which the proper programming tool is FLIP, to be found at Atmel's webpages.

JW

xtracool_protik

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
Re: 89c51re2
« Reply #2 on: March 27, 2008, 05:52:30 am »
Ya I've seen that and really sorry for no prefix but you are right its atmel's.
I have FLIP but I've heard flash magic is good
So can you help me about FLIP
I want 2 serial port and atmel offers it only with re2 and I'm familiar with atmel instruction set thats why I'm using it
 Thank you

Jan Waclawek

  • Full Member
  • ***
  • Posts: 220
    • View Profile
    • EFTON homepage
Re: 89c51re2
« Reply #3 on: March 27, 2008, 06:04:00 am »
I don't quite understand what's your problem with FLIP, but anyway, as this is a FlashMagic-specific forum, you better should repost your question on the 8052.com's Forum (please observe the rules for posting there).

JW