Author Topic: Problem using Flash Magic with LPC935  (Read 4546 times)

quispe

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
Problem using Flash Magic with LPC935
« on: May 11, 2011, 07:57:17 pm »
I am using FM with LPC935 and was all correct but after one day it stop working. I know that LPC must have three negative pulses on RST pin after VCC goes high, but I put an Oscilloscope and I can't vew it any more, anyone can give me some help? I have replace the microcontroller for a new one and it does not work.

Please view the picture above



Uploaded with ImageShack.us

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2160
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Problem using Flash Magic with LPC935
« Reply #1 on: May 12, 2011, 03:09:43 am »
Make sure you have the option to use DTR and RTS to enter ISP mode enabled in the advanced options.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com