Author Topic: LPC23XX Ethernet Bootloader Starting Address  (Read 2969 times)

tungsys

  • Jr. Member
  • **
  • Posts: 4
    • View Profile
    • Email
LPC23XX Ethernet Bootloader Starting Address
« on: April 10, 2013, 02:59:51 am »
Hi Andy,

I have another question regarding the starting address of application that download by Ethernet bootloader.

In normal condition (without the bootloader) I run my application and it work well.

But when I download it with Ethernet bootloader, it doesn't work no matter I changed the starting address from 0x0 to 0x2000

What other parameter should I change in my application so that I can work after downloaded by Ethernet bootloader.

The application I am using is the tiny webserver from Keil
You can find it here: http://www.keil.com/download/docs/295.asp

Thank you for your great support.
« Last Edit: April 11, 2013, 01:16:01 am by Andy Ayre »

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2143
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC23XX Ethernet Bootloader Starting Address
« Reply #1 on: April 11, 2013, 01:15:34 am »
You need to look at the map file and ensure the reset vector is at 0x2000 and nothing is located below that address.

Note - please start a new topic for new questions.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com