Author Topic: LP1759 does not work in the command line  (Read 2404 times)

msbechtold

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
    • Email
LP1759 does not work in the command line
« on: December 16, 2013, 02:18:46 pm »
C:\Program Files (x86)\Flash Magic>fm COM(5, 115200) DEVICE(LPC1759, 0.000000) HARDWARE(BOOTEXEC, 50, 100) ERASE(DEVICE, PROTECTISP) HEXFILE(Z:\XS26\Firmware\1.0.76r6082\XS26.MicroABRelb76r6082.hex, NOCHECKSUMS, NOFILL, PROTECTISP)
Flash Magic Version 7.67.3377
8051/XA Driver Version 3.04.3296
ARM UART Driver Version 3.11.3302
ARM Cortex UART Driver Version 4.64.3377
ARM Ethernet Driver Version 2.05.3296
ARM Cortex Ethernet Driver Version 2.07.3296
ARM CAN Driver Version 2.11.3296
(C) Embedded Systems Academy 2000-2013 All rights reserved
NON PRODUCTION USE ONLY

ERROR: Invalid parameters for DEVICE directive: DEVICE(LPC1759, 0.000000)

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2160
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LP1759 does not work in the command line
« Reply #1 on: December 18, 2013, 07:09:58 am »
You are not using the DEVICE directive correctly. Please see the description in the manual for details of the third parameter.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com