Author Topic: AutoBaud  (Read 1421 times)

gnilsson

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
AutoBaud
« on: August 29, 2015, 11:07:46 pm »
Hi all
I get Autobaud error when running command line. GUI programs OK.
Have turned power off, disconnected USB when switching GUI/Command line.
I minimized the command line to only an erase.
Se attachments.
Any ideas?
Best Regards Goran


Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2124
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: AutoBaud
« Reply #1 on: September 04, 2015, 01:16:57 am »
Are you missing the HARDWARE directive on the command line?

In the GUI version go to the File menu, export the command line directive and compare to what you are using. What is the difference?

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com

gnilsson

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
Re: AutoBaud
« Reply #2 on: September 04, 2015, 10:33:44 pm »
Hi Andy
Problem solved, I had missed the HARDWARE command when reading the manual.
Thanks for a fast response
Best Regards
Goran