Author Topic: LPC1227/301 Command Line issue  (Read 2000 times)

spybeck

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
    • Email
LPC1227/301 Command Line issue
« on: November 17, 2015, 06:34:38 am »
Hi Sir,

I am successfully to program NXP LPC1227/301 using Flash Magic GUI (refer to IMG_20151117_215733.jpg), but fail to program using command line (refer to IMG_20151117_220021.jpg).

Below is the command line which i type to the command Prompt, please correct me if any command wrong.

C:\Program Files\Flash Magic>FM COM(4,38400) DEVICE(LPC1227/301,11.0592) ERASE(DEVICE,PROTECTISP)  HEXFILE("C:\RE_601_COMM_02_20_07.hex",NOCHECKSUMS,FILL,PROTECTISP)  VERIFY("C:\RE_601_COMM_02_20_07.hex",NOCHECKSUMS) READCRC(DEVICE)

THANKS


Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2160
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC1227/301 Command Line issue
« Reply #1 on: November 18, 2015, 04:19:48 pm »
DEVICE directive takes three parameters - see section 8.6 in the manual.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com