Author Topic: LPC-Link2 as SWD interface  (Read 2887 times)

GonzaloSipel

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
LPC-Link2 as SWD interface
« on: January 08, 2016, 06:17:38 am »
Hi everyone:
We have developed a custom board based on LPC1788 and we have written a firmware which is 450 kbytes long. We have tried to upload code using  a COM port and although this works fine, it is too slow. Now we are going to buy a LPC-Link2 board and we would like to know if there any limit about size code or any other things.
Regards.

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2155
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC-Link2 as SWD interface
« Reply #1 on: January 11, 2016, 12:49:56 am »
There is no limit on code size.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com