Author Topic: lpc925 programs  (Read 1360 times)

yasingol

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
lpc925 programs
« on: April 12, 2016, 06:33:53 am »
I have LPC925 AND I USing flashmagic software

I HAVE USBTORS232 CONVERTER  WHIC PINS CONNECTED TO    RX,TX AND RESET ON THE  LPC925

WHAT İS THE BAUDRATE   AND INTERNAL OSILATOR VALUE

DO YOU HAVE DATASHEET

PLEASE HELP ME

 

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2124
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: lpc925 programs
« Reply #1 on: April 13, 2016, 02:30:27 am »
Please don't write in capitals - it is the internet version of shouting at people.

Please see the schematic of the MCB900 board on keil.com.

Start with a baudrate of 7200.

The data sheet and user manual are available from www.nxp.com/microcontrollers.
Embedded Systems Academy, Inc.
support at esacademy dot com

yasingol

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
Re: lpc925 programs
« Reply #2 on: April 15, 2016, 02:04:12 am »
thanks but ı AM NOT USE mcb900 board
is it possible wihtout mcb900 board?


Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2124
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: lpc925 programs
« Reply #3 on: April 15, 2016, 02:20:39 am »
Of course. Just because a company puts the schematics of their board on their website for free, doesn't mean you have to buy their board.
Embedded Systems Academy, Inc.
support at esacademy dot com