Author Topic: Flash Magic Interface  (Read 1207 times)

jdr

  • Jr. Member
  • **
  • Posts: 12
    • View Profile
    • Email
Flash Magic Interface
« on: April 28, 2016, 04:09:34 pm »
What does Flash Magic do exactly with the Interface selection set on "None(ISP)" as opposed to "FDI USB-ICP-80C51ISP" when you are using the 80C51 programmer? It seems to still control the DTR and RTS lines at least with the "Assert DTR and RTS while COM Port open" selected in Advanced Options/Hardware Config.

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2089
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Flash Magic Interface
« Reply #1 on: April 29, 2016, 09:20:51 am »
Removes features from the UI that are not relevant.
Forces the use of DTR and RTS to enter and exit ISP mode.
Sets the post open delay to zero.
« Last Edit: April 29, 2016, 09:31:27 am by Andy Ayre »
Embedded Systems Academy, Inc.
support at esacademy dot com