invalid value or command sent.please try the operation again.(nothing to erase)

Started by eshwar, June 14, 2016, 10:48:24 PM

Previous topic - Next topic

eshwar

Hi,
 
     I bought the MYDLPC development board Containing LPC4357 Micro controller. i got the sample hex files for LED blink,ADC,Timer etc with that board.I am using Flash magic version 7.02.2932 to download the hex files to the LPC board.I successfully download the LED blink hex file to the board but when i am trying to download the other hex files i  am getting the error "invalid value or command sent.please try the operation again.(nothing to erase)". so i can't download the hex file to the board.i checked the device signature in ISP option. it reads the device.where i am doing the mistake. please suggest me.

thanks

Eshwar

Andy Ayre

In section three of the main window click on the "Info" link. What does it show? Can you post a screenshot?

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com

eshwar

thanks for your reply. i attached the screen shot.please find the following attachment.

Andy Ayre

Your screenshot is such low resolution that I can't read anything!

However, I can just make out that it says 0.00% of the device is used. So my guess is that none of the data in the hex file is inside the memory range of the microcontroller.
Embedded Systems Academy, Inc.
support at esacademy dot com