Author Topic: Unable to read LPC812  (Read 1044 times)

criki

  • Jr. Member
  • **
  • Posts: 3
    • View Profile
Unable to read LPC812
« on: July 04, 2016, 10:40:19 am »
Hello guys,

Well I use Flash Magic 9.81 4250 with Windows 10 surface pro 4

I can Read Device Signature, also Read Security, program the LPC812 with a .HEX file

But the display memory and check fail for a transmit/receive problem ... is there any clue to overcome this problem ..

Thank's a lot

Rgds

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2105
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Unable to read LPC812
« Reply #1 on: July 05, 2016, 08:46:31 am »
Please post a debug file. Instructions are here: http://www.flashmagictool.com/debugfile.html

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com

criki

  • Jr. Member
  • **
  • Posts: 3
    • View Profile
Re: Unable to read LPC812
« Reply #2 on: July 07, 2016, 08:53:10 am »
Thank's a lot
I will do asap ..

Best regards

criki

  • Jr. Member
  • **
  • Posts: 3
    • View Profile
Re: Unable to read LPC812
« Reply #3 on: July 09, 2016, 09:53:07 am »
Hello,

As requested please find the debug file that contains :
- a Read Signature that works perfectly
- a Display Memory that ends by Unable to communicate (Transmit-Receive)

But I confirm that programming the LPC812 is ok and the programs downloaded works perfectly.

Best regards

criki

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2105
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Unable to read LPC812
« Reply #4 on: July 27, 2016, 03:39:04 pm »
Sorry for the delay in getting to this. Please try version 9.82.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com