Author Topic: Failed to read device signature (operation failed, reading signature)  (Read 183 times)

evoluer

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
    • Email
Hello all,
I am having a problem for the last 3 weeks and i am not able to find a solution for it. Let me explain the problem in detail.

When i try to download the program, i get the following error Failed to read device signature ( operation failed .(reading signature)). Accessing a device using the wrong protocol could render the device unusable. Do you want to continue?

controller: lpc2148
oscillator: 12MHz crystal
serial connection through max3232
reset and program switch connection
Software used : Flashmagic version9.73.4146 arm7 UART driver version: 5.00.3965

Hope someone can point me in the right direction

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2121
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Failed to read device signature (operation failed, reading signature)
« Reply #1 on: September 12, 2017, 12:39:40 am »
Please generate a debug file then post back with it attached. Instructions are here:

  http://www.flashmagictool.com/debugfile.html

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com