Author Topic: LPC11C24F programming  (Read 74 times)

selnet

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
    • Email
LPC11C24F programming
« on: February 03, 2018, 05:25:50 pm »
Hallo Dear
I have a problem .I have EPC V3 R5C and it has LPC11C24F .I have burnt the mcu with 30 volt supply voltage  after I  changed it. But it dosnt work .I've  loaded the hex file to the new mcu via Flashmagic .It doesnt seem any problem with program but the mcu doesnt work .Can anyone help or has any experience about this issue. Thanks in advance .Regards

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2127
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC11C24F programming
« Reply #1 on: February 05, 2018, 01:01:35 am »
You have probably damaged it by applying 30V. It's far too much.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com