Author Topic: LPC54606 report first block CRC error by Flash magic 11.0 under UART ISP mode  (Read 135 times)

heciang

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
I have verified on official lpc54608 board, I also meet the same problem with my target LPC54606 board, after flash magic download the code, then do the verify.
I meet first block CRC error problem as attached picture, and go to the next step, the flash magic say the address 0x00000004 is different.
But I use the JLINK to read out the chip flash 0x00000004, and compare it with the .hex file, I find the data is totally the same.
So, I think it is may caused by the flash magic bug. Could you help check it?

heciang

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
Dear,

Do you have some update?

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2142
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Please send a debug file showing programming and verify to support at esacademy dot com.
Embedded Systems Academy, Inc.
support at esacademy dot com