Author Topic: How to program P89C51RD+IA  (Read 6165 times)

omidrezaei

  • Jr. Member
  • **
  • Posts: 6
    • View Profile
How to program P89C51RD+IA
« Reply #135 on: April 23, 2018, 11:07:54 am »
Hi

Every body any body Can help how can I make copy from this micro P89C51RD+IA. Which programs need how to connect to pin?

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2156
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: How to program P89C51RD+IA
« Reply #136 on: April 24, 2018, 12:43:41 am »
You need to connect the UART to an RS232 transceiver which is then connected to your PC COM port.
You also need to put the part into ISP mode which requires pulling some pins. See the user manual from NXP for details.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com

omidrezaei

  • Jr. Member
  • **
  • Posts: 6
    • View Profile
Re: How to program P89C51RD+IA
« Reply #137 on: April 24, 2018, 12:46:43 pm »
Thanks so much for your advice.