Author Topic: connection problem  (Read 2329 times)

daniel

  • Guest
connection problem
« on: March 01, 2004, 03:54:40 am »
We have a robot,
it uses max232 to connect the seriel programmer of p89c51rc2bn
we used erase  and it hang-
and from that moment the chip is not responding.

can you   help me?

Adi

  • Guest
Re: connection problem
« Reply #1 on: March 01, 2004, 05:59:43 am »
i

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2162
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: connection problem
« Reply #2 on: March 01, 2004, 07:13:52 am »
Daniel - it could be any number of reasons. The most likely one is the reset problem described on the errata sheet for that device. Please give that a try and if it doesn't work then look at the "What to do if ISP does not work" application note on the Flash Magic web page. The steps in the app note will help you and me to narrow the problem down.

Embedded Systems Academy, Inc.
support at esacademy dot com