Author Topic: Direct load of baud rate in LPC932  (Read 3642 times)

David Suryadinata

  • Guest
Direct load of baud rate in LPC932
« on: April 27, 2004, 01:54:46 am »
Dear All,
        How to calculate direct load of baud rate in LPC932 in ISP mode to get communicating in higher baudrate ? because with only sending U character can connect max. 14400 bps

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2162
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Direct load of baud rate in LPC932
« Reply #1 on: April 27, 2004, 08:17:12 am »
Flash magic already has this built in - just turn on High Speed Communications in the Advanced options. Note that the direct load of baud rate does not work properly on the LPC932 - you will have to use another device like the LPC935.

Embedded Systems Academy, Inc.
support at esacademy dot com

David Suryadinata

  • Guest
Re: Direct load of baud rate in LPC932
« Reply #2 on: April 27, 2004, 09:01:51 pm »
Thankyou Andrew, do you know how flash magic doing high speed comm in ISP mode for LPC932  without seting direct load of baud rate ?

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2162
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Direct load of baud rate in LPC932
« Reply #3 on: April 27, 2004, 09:07:58 pm »
Flash Magic does not provide the high speed comms feature for the LPC932, because the direct load of baudrate does not work properly.

Embedded Systems Academy, Inc.
support at esacademy dot com

Bauke

  • Guest
Re: Direct load of baud rate in LPC932
« Reply #4 on: April 28, 2004, 08:54:37 pm »
Hi,

The LPC932A wil soon be coming out with the dirrect load feature. I have seen speeds upto 115200 baud with FlashMagic and the devices that support it (the high speed comms feature of FlashMagic use the dirrect load in ISP).
The LPC932A will also have the ability to be programmed with ICP and the ability to do byte erase funtions on the Flash memory.

Regards,

Bauke

David Suryadinata

  • Guest
Re: Direct load of baud rate in LPC932
« Reply #5 on: April 29, 2004, 09:24:26 pm »
Hi,
    When will exactly LPC932A come out ? What diferrent ISP with ICP ?Anyway thankyou for all people who responses my question, very helpfull.