On my laptop (Windows 8.1 64-bit) flashmagic can't flash a LPC2103. However if I try to program the same board with the same usb-uart cable on my pc (Windows 7 64-bit) it works just fine.
I tried Flashmagic version 9.20.3898 and 8.81.3813 (this version i use on my win7 machine) both versions give the same error on my win8 machine: "Operation Failed. (programming - failed to send data to device)"
Flash Magic is able to enter the bootloader, I can read the device signature.
In fact if I use the erase flash function it tells me it completed the erase, but in fact it did not erase the chip.
If I manually enter the bootloader via a serial terminal on that machine and erase it "by hand" the chip does get erased.
It get even stranger because on this win8 machine Flashmagic is able to program a LPC1766 and a LPC1227.
Can anyone suggest how I can get it to work.
I tried Flashmagic version 9.20.3898 and 8.81.3813 (this version i use on my win7 machine) both versions give the same error on my win8 machine: "Operation Failed. (programming - failed to send data to device)"
Flash Magic is able to enter the bootloader, I can read the device signature.
In fact if I use the erase flash function it tells me it completed the erase, but in fact it did not erase the chip.
If I manually enter the bootloader via a serial terminal on that machine and erase it "by hand" the chip does get erased.
It get even stranger because on this win8 machine Flashmagic is able to program a LPC1766 and a LPC1227.
Can anyone suggest how I can get it to work.