Hi All,
Hoping you can help me out with a problem I'm having with Flash Magic. I'm having connectivity problem using ISP to program my board. I know flash magic works because I used it on a couple boards previously but now for some reason I'm unable to connect anymore. I have the following settings: COM 2, baud rate = 9600 bps, Device = 89C51RD2xx, Interface = None (ISP).
I have checked that the upper case 'U' character is correctly echoed at 9600 bps but for some reason flash magic keeps throwing the "Unable to connect at the specified baud rate". This suggests to me that my target boards is following the ISP protocol as outlined in the Manual for the P89C51RD2.
Any ideas of why I can't connected.
Hoping you can help me out with a problem I'm having with Flash Magic. I'm having connectivity problem using ISP to program my board. I know flash magic works because I used it on a couple boards previously but now for some reason I'm unable to connect anymore. I have the following settings: COM 2, baud rate = 9600 bps, Device = 89C51RD2xx, Interface = None (ISP).
I have checked that the upper case 'U' character is correctly echoed at 9600 bps but for some reason flash magic keeps throwing the "Unable to connect at the specified baud rate". This suggests to me that my target boards is following the ISP protocol as outlined in the Manual for the P89C51RD2.
Any ideas of why I can't connected.