Hello,
at first many thanks for providing Flash Magic. It's a great software!
I only have a problem with FM.exe. The windows version FlashMagic.exe supports the P89C669 device (it's in the list). When I use the command line version FM.exe I can't select this device (not listed in the manual).
Selecting e.g. 89C668 in command DEVICE makes the programmation fail.
I'm using FlashMagic V1.77 and Dll V1.51
Can anybody help me?
Thanks a lot!
Dirk
The 669 will be supported on the command line in the next release of Flash Magic.
Version 1.79 is now available with 669 support on the command line. Let me know if you spot any problems.
Hello Andy,
it's working fine!
Thank you
Dirk
Hello Andy,
unfortunately I'm now facing a problem with FlashMagic in the windows as well as in the command line version (V1.79/Dll V1.52) in combination with the P89C669:
As soon as the code in the hex file to be programmed exceeds 2k bytes I get the message "Error programming the hex file. Address: 0x000803."
Thanks for your help!
Dirk
Dirk,
Please Email me your hex file that is causing this problem. My Email address is below and on the Flash Magic web page at the bottom. Thanks.
I just sent it to "info@esacademy.com".
That wasn't the right address, but my collegue will forward it to me later today. Thanks.
Sorry, the problem was not on your side!
The