Messages

There is definitely an L. All the printing on the IC is:
P89LV51RD2BBC
CM5157.02
kz0410 AC

The crystal is marked 22,1C49

I contacted them and Pictiva only works on COM1.
But should I get the Flash Magic device ID error? IS 89lv51rd2 BF manu 91 dev ID1?
Also is 7200 baud the fastest I should expect Flash magic to connect at?

I have made some progress.
I am using the pictiva demo with Flash magic. I can connect at 7200 baud.  It keeps telling me I have wrong device signature. It reads BF manu 91 dev ID1. I have entered 89lv51rd2 in flash magic. That is what is on the board. I am on COM5. I download and execute the demo firmware C:\Program Files\Osram\Pictiva\firmware\Reference Design.hex and then I do  the Pictiva demo and say transfer to flash it never seems to do anything. I leave it on for a while.

I have a Osram Pictiva OLED Demo board with a P89LV51RD2 on it. Flash Magic is specified to use to download to it. I am able to use the Flash Magic terminal at 115 Kbaud only. Other than that I cannot establish communication at any baud rate.
Can anyone suggest any solutions.