Print Page - problem with fm

Title: problem with fm_connect on V664
Post by: wengkee on April 06, 2006, 03:22:34 AM

HI,

This is what happened.
I select device P89V664.
I used the function fm_connect to connect to the device, without the actual device connected.
I should failed after the time out since there is no device connected
but what happened is that it Pass and when I do a fm_blank_check, it just hang there. Look like there is a bug in fm_connect cos since there is not device connected, it should reeturn faile.

If I chose C664 and use fm_connect without the actual device connected, it will failed after some time (time out?).
DO you know why it is so and how can I over come this?

Title: Re: problem with fm_connect on V664
Post by: Andy Ayre on April 06, 2006, 08:39:52 AM

We replied via email for purchased product support.

Title: Re: problem with fm_connect on V664
Post by: Tia on April 11, 2006, 12:37:13 AM

Hi Andrew.

I am facing the same problem as wee kee. The return value of fm_connect is always a 1 when device change to v664. (Even when the COM is not connected).

Any update on this issue please update me as well.

ThankU.

Regards
Tia

Title: Re: problem with fm_connect on V664
Post by: Andy Ayre on April 18, 2006, 08:25:12 AM

Hi, please email me (see my signature) with your activation code and I will send you the fix.

Flash Magic Forum

In-System Programming Support => P89C51Rx+/P89C51Rx2/P89C66x/P89C6xX2/P89V66x => Topic started by: wengkee on April 06, 2006, 03:22:34 AM