Print Page - Reset Device Box

Title: Reset Device Box
Post by: imaguari on July 17, 2007, 08:10:40 AM

Hi, I have installed Flash Magic in several PC's without problems. But the last time I have instaled it in a PC, when I try to program a P89V51RD2, after I press "Start" the box "Reset Device" doesn't appear.

Imaguari

Title: Re: Reset Device Box
Post by: Andy Ayre on July 17, 2007, 09:49:16 AM

Do you have DTR and RTS enabled in the advanced options? If Flash Magic thinks it is controlling the ISP entry then it won't bother asking you to reset the device.
Also double-check you have selected the correct device.

Andy

Title: Re: Reset Device Box
Post by: imaguari on July 17, 2007, 11:18:14 PM

Thank you. I have never changed any advanced options. I always have installed the program and tryed to program a P89V51RD2 or P89LV51RD2. The other day after I installed the program in several PC's I find one that worked properly.
Is there any incompatibility with OS or program?.

Title: Re: Reset Device Box
Post by: Andy Ayre on July 18, 2007, 09:31:44 AM

The default setting for DTR/RTS changed in the last few months because most users now use that option (in general).

Andy

Title: Re: Reset Device Box
Post by: imaguari on July 25, 2007, 05:03:17 AM

Thank you. You are right. The problem was the setting of DTR/RST.
Imaguari

Flash Magic Forum

In-System Programming Support => P89V51Rx2/P89LV51Rx2 => Topic started by: imaguari on July 17, 2007, 08:10:40 AM