Messages

hi!! i want to know if i can send data to my microcontroller through internet?? for example i want to set outputs bits or read inputs? how can i do it? i saw a web server example but i do not know about the kit capabilities!

hi again!! i want to know the osc frequency that i have to use in flash magic! i hace a lpc-p2378 stk (04) i can not find it! so i need help!! 

HI EVERYBODY!! THIS IS MY FIRST POST HERE!! I REALLY NEED SOME HELP! I CAN NOT PROGRAM MY KIT, I FOLLOWED THIS STEPS BUT IT DOES NOT WORK, AND I DO NOT KNOW WHAT OSC FREC USE!

- Download and install Flash Magic.
- Connect the board's serial connector to your PC's serial (COM) channel with the serial cable
- Set the jumpers on the board so that ISP mode is enabled.
- Reset the board
- In Flash Magic, choose the right COM port (usually COM1)
- In Flash Magic, do "ISP => Read Device Signature".
If the chip responds with the Signature and the Boot Loader Version then you are connected and you can now program a hex file using this setup.

WHEN I AM DOING THE "read device signature" an error appears that say  "Operation failed,(failed the autobaud, step 1) "  SO I DO NOT KNOW WHAT TO DO! SO PLEASE HELP ME!!!