Flashmagic crashes when i use the Display Memory isp feature.
The display memory gets filled with the devices data and then crashes.
This is with an lpc2103
Anyone got someting similar or is it murphy playing here ?
Johan
Which version are you using?
What is the exact error message?
Does it happen every time or only sometimes?
Which version of Windows?
Andy
same here. 4.18.1224 production
i'm using an lpc2366, and whenever I try to read the larger sectors (32k) it happens. I slow the speed down and it goes away.
I get a lot of null reference msgbox's before I have to kill it.
Does it happen every time or only sometimes?
What baudrate are you using that causes the problem?
Which version of Windows?
Andy
everytime at 57.6k, backing down 38.4 works. xp v5.1.2600
I'll grab some screenshots if it helps any. I also have the problem of using 'save as..' and it thinks that 0x2ffff is the top of mem, so I have to use lpc2368 to read out that last 64k.
I will see if I can reproduce these problems.
Andy
I think I've found another way to break it ... I slow it down to 19.2k and then while it's downloading the sector (before it finished) I grab the slider on the right and scroll it - I get an instant exception.
Ok, good. I don't have a board that can run at 57600, so I was looking for another way to reproduce the problem. I'll give this a try.
Andy
sorry, forgot another:
I make sure the sector/mem range drop-down is in focus and use the scroll button on the mouse to move through sectors quickly and I also get the exceptions too.
Well, I tried to make Flash Magic crash and couldn't. I tried all your methods and it works fine.
I am wondering if your copy of riched32.dll might be corrupted or downgraded by an application you have installed. If you don't have Wordpad installed, try installing it.
I will fix the problem with saving the full address range of the LPC2366. Look for a new release in the next couple of days.
Andy
ah - good idea. I'll see if that fixes anything.
the top of flash range problem is now gone w/4.21, thanks again. I've tried to reinstall/re-reg RICHED20.dll and I still get my errors. For the record, here is the error msg as you requested (I missed that request earlier):
(http://i199.photobucket.com/albums/aa3/EssEssRacing/fm.jpg)
Can you please email me riched20.dll to support at esacademy dot com. Thanks.
Andy
The problem was solved by replacing riched20.dll with a copy that is 431,616 bytes in size. If you run into this problem check the size of your Windows\System32\riched20.dll. Note - only replace this file at your own risk.
Andy