Print Page - How to program P89LPC920 with MCB900 kit

Title: How to program P89LPC920 with MCB900 kit
Post by: Raje on April 22, 2004, 07:35:35 PM

I have the MCB900 kit and I installed the Flashmagic software. I read the Appnote AN10258 from Philips website and it says I need ISP-ICP software bridge to program P89LPC920 using MCB900 kit. My questions related to this are:

1. Where can I find this software (prog90x.hex)?
2. Do I need a PNP transistor in my application end (with LPC920). If so, how should the circuit look?

I also have the EPM900 kit but I could not find any clear information on how to use it. Any documents and explanations will be extremely appreciated.

Thanks,

Title: Re: How to program P89LPC920 with MCB900 kit
Post by: Bauke on April 23, 2004, 07:31:08 PM

Hi,

You can either use ISP or ICP with the LPC920. Details on ICP are given in http://www.semiconductors.philips.com/acrobat/applicationnotes/AN10258_1.pdf

Regards,

Bauke

Flash Magic Forum

Archive => Old Topics => Topic started by: Raje on April 22, 2004, 07:35:35 PM