Hello
In Flash Magic Tool, it's not possible to select ethernet flashing way for LPC1833.
Is there a workaround to flash a 1833 with flash magic ?
Is is plan to add "LPC1833 ethernet" in selected device ?
thanks a lot
Marion
In order for Flash Magic to support Ethernet on a device there first needs to be a bootloader. Have you already ported the LPC1700 ethernet bootloader to the LPC1800?
Andy
I'm currently porting the LPC1700 ethernet bootloader to the LPC1833.
I have already a projet based on LPCOpen which work with ethernet on my target. I use LPCOpen to adapt the low level layer.