Print Page - second Power up

Title: second Power up
Post by: Julien Themont on October 10, 2003, 07:09:13 AM

Hi all,

I am currently working on a 89LPC932 version F.
I had to turn off its power supply after it was turned on for the first time.
No ISP cable/ ISP procedure was connected/started.

Will I still be able to program it the second time, and write the break character detection prog to it ?

Thanks

Title: Re: second Power up
Post by: Andy Ayre on October 10, 2003, 08:20:23 AM

If you didn't send any ISP commands then the status bit should still be set, so when you power the device up it should enter ISP mode again.

Flash Magic Forum

Archive => Old Topics => Topic started by: Julien Themont on October 10, 2003, 07:09:13 AM