Print Page - IAP commands P89V51RD2

Title: IAP commands P89V51RD2
Post by: Rudi on June 18, 2007, 06:05:53 PM

Hello,

I have got a question, is there any command in IAP mode available for eraseing single Data Bytes or sectors? In the Data sheet is just one command for eraseing the whole Block 0. Had there been any updates?

Does anyone has an updated Firmware, that is able to erase single Databytes or sectors?

Thanks in advance.

Rudi

Title: Re: IAP commands P89V51RD2
Post by: Jan Waclawek on June 19, 2007, 01:20:27 AM

Well, you have an amazingly old datasheet... Any newer DS than version 1 specifies the IAP command for sector erasing - and you don't need to update the bootloader for this purpose.

Jan Waclawek

Title: Re: IAP commands P89V51RD2
Post by: Rudi on June 19, 2007, 02:26:53 AM

You are right, I don't know why, but I still looked up in the oldest Version of my Datasheet...

Thank You

Title: Re: IAP commands P89V51RD2
Post by: Je Gold on June 20, 2007, 07:21:38 AM

Data sheet from here

http://www.standardics.nxp.com/search/~P89CV51RD2/#P89CV51RD2
joe

Flash Magic Forum

In-System Programming Support => P89V51Rx2/P89LV51Rx2 => Topic started by: Rudi on June 18, 2007, 06:05:53 PM