Hi all,
I've bought from Olimex LPC2378STK (with a small LCD embedded). I've received the board in a red box without any documentation. NOTHING.
I've powered the board with 7-8volts DC and I could see the Olimex Logo on that LCD.
Now: I downloaded the FlashMagic and I need to build a RS232 cable to connect to UART0.
I don't know the pinout!
I suppose is:
PC-board (pins DB9)
2-3
3-2
4-6
6-4
7-8
8-7
But I need a confirmation for that.
Thank you
I've built a straight serial cable and it is working with flashmagic