Text only | Text with Images

Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: shiue on November 23, 2004, 09:49:34 PM

Title: Is ISP hex file opened for lpc922 ?
Post by: shiue on November 23, 2004, 09:49:34 PM
I am not care to erase lpc922.
So, I want to use parallel programmer to reprogram.
Where is  ISP hex file for lpc922.
Are they the same between lpc932 and lpc922 ?
Title: Re: Is ISP hex file opened for lpc922 ?
Post by: shiue on December 04, 2004, 12:57:58 AM
I use ALL-P3 programmer to program ISP into 922 chip.
ALL-P3 programmer support this function.

ISP programs are not the same between lpc932 and lpc922.
Title: Re: Is ISP hex file opened for lpc922 ?
Post by: Hitesh on December 22, 2004, 07:10:44 PM
hello shiue,

can you tell me where all-p3 is available? and what price? apart from parallel mode, does it spport ISP/ICP also?

regards
Title: Re: Is ISP hex file opened for lpc922 ?
Post by: shiue on December 31, 2004, 07:13:29 PM
Hi,Hitesh

You can reference http://www.hilosystems.com/.
Title: Re: Is ISP hex file opened for lpc922 ?
Post by: erikm on January 04, 2005, 04:44:15 AM
>>I am not care to erase lpc922.
So, I want to use parallel programmer to reprogram.<<

You can not program flash without erasing it first.

Erik
Title: Re: Is ISP hex file opened for lpc922 ?
Post by: OmarE on January 27, 2005, 09:36:18 AM
Dear Gentlemans,
ICP is the best way to program a LPC922 once you make a mistake using ISP and changed the value of Boot Vector.
I developed an ICP programmer for LPC922 and the complete LPC series.  It is different than used in the bridge with LPC932.

Any interest you can contact me at: oespinosqeeppm.com

Regards
Omar E
Title: Re: Is ISP hex file opened for lpc922 ?
Post by: OmarE on January 27, 2005, 10:16:54 AM
Dear Gentlemans,
ICP is the best way to program a LPC922 once you make a mistake using ISP and changed the value of Boot Vector.
I developed an ICP programmer for LPC922 and the complete LPC series.  It is different than used in the bridge with LPC932.

Any interest you can contact me at: oespinosqeeppm.com

Regards
Omar E
Title: Re: Is ISP hex file opened for lpc922 ?
Post by: OmarE on January 27, 2005, 10:17:25 AM
Dear Ladies/Gentlemans,
ICP is the best way to program a LPC922 once you make a mistake using ISP and changed the value of Boot Vector.
I developed an ICP programmer for LPC922 and the complete LPC series.  It is different than used in the bridge with LPC932.

Any interest you can contact me at: oespinosqeeppm.com

Regards
Omar E
Text only | Text with Images