Print Page - ICP programming LPC932A1

Title: ICP programming LPC932A1
Post by: Simon on December 26, 2004, 04:05:39 AM

Hi
I read thet new version support alsow ICP programming. I'l kike to use all 8K of flash so I need paralell or ICP. Is it possible to program with flash magic?
p.s. why do you need to set xtal ??

By Simon
Happy new year to all!

Title: Re: ICP programming LPC932A1
Post by: Andy Ayre on December 27, 2004, 06:43:39 AM

Yes, you can use ICP with Flash Magic. To do this you need to program a device such as the LPC932 with the ISP to IAP bridge code - available as a hex file on the Flash Magic web page, towards the bottom. You then connect the LPC932 to the LPC9xx device you wish to program via ICP. The LPC932 will convert ISP commands to ICP commands and vice versa.

Details are in Philips application notes.

The xtal is used for the devices that support high speed communications.

Title: Re: ICP programming LPC932A1
Post by: Simon on December 29, 2004, 10:24:32 AM

Like i understand you. I choice LPC901 (or other), and connect ICP pins and thet is it?

Title: Re: ICP programming LPC932A1
Post by: Andy Ayre on December 29, 2004, 10:33:56 AM

I gave you a description of what to do. I suggest you read the relevent application note on ICP available on www.philipsmcu.com.

Title: Re: ICP programming LPC932A1
Post by: Simon on December 30, 2004, 09:37:29 AM

I' will
Thenx

Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: Simon on December 26, 2004, 04:05:39 AM