Flash Magic Forum

In-System Programming Support => General => Topic started by: Charles Osborn on March 18, 2005, 11:31:28 AM

Title: COM Port support
Post by: Charles Osborn on March 18, 2005, 11:31:28 AM
When will Flash magic support com ports greater than 4?
Title: Re: COM Port support
Post by: Andy Ayre on March 18, 2005, 11:35:24 AM
It already does. Please read the Hints and Tips application note:

http://www.esacademy.com/software/flashmagic/appnotes/HintsandTipsAppNote.pdf

Title: Re: COM Port support
Post by: Trung Le on April 12, 2005, 09:45:41 PM
I use 89C51RA2BA, but when I connect to Flash Magic through RS232 it notice " Unnable to connect at the specified baud rate. Try reducing the baud rate....". I checked hardware carefully. Pls. help me this probem.
Thanks and best regards,
Trung
Title: Re: COM Port support
Post by: Andy Ayre on April 12, 2005, 09:49:45 PM
Have you read through the Flash Magic application note "what to do when ISP does not work"? If not, please work your way through it as it will guide you to narrow the problem down.