Hi all,
Does anybody have any experiences with programming of new LPC9100 devices.
I'm trying to program it by MCB900 (LPC932 loading with prog90x.hex v 1.4) board through proper cabel (rev 2 with NPN transistor) and got only "FF".
I suppose it is problem with getting into ICP state.
Pleas help me !
regards
Wojtek Lapinski
Poland
I've used an LPC9107 without problems, however I used a PAB900 and an MCB900 with version 1.4 of prog90x.hex programmed into the LPC935. The hex file works, so it must be a hardware problem somewhere.