Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: Valery Puchkov on June 27, 2005, 03:09:02 AM

Title: 89LPC936 ISP programming
Post by: Valery Puchkov on June 27, 2005, 03:09:02 AM
Hello,
I successfully programmed uCU 89LPC935 (having 8 Kb code memory)
with Keil uv2 and Flash Magic v 1.95. Now I am trying 89LPC936.
It has 16 Kb code memory. This device is absent in the device list
of Flash Magic. So I select  89LPC935. Everything is OK until my
program is less than 8 Kb. When in exceeds this amount it does not
work. I understand that the problem arises because 89LPC936 is not
supported at the time by Flash Magic. Anyway, can I use Flash
Magic in some way to solve my problem?
Title: Re: 89LPC936 ISP programming
Post by: Andy Ayre on June 27, 2005, 07:36:07 AM
The LPC936 was added in Flash Magic 2.06. We are now at version 2.30. Please download the latest version. Thanks.

Title: Re: 89LPC936 ISP programming
Post by: Pratik Vyas on June 29, 2005, 03:54:58 AM
Hello Valery,

I am new to the world of uP's, I have built an application around LPC922, works well on Keil uV2 simulator.

Now we need to programm the chip, could you please explain how it can be done using uV2 and flash magic, that is what hardware needs to be built and the procedure to follow.

Thanks,

Pratik.
Title: Re: 89LPC936 ISP programming
Post by: Andy Ayre on June 29, 2005, 07:57:15 AM
For ISP copy the Keil MCB900 circuit. For ICP copy the Keil MCB900 circuit, use an LPC935 programmed as the bridge and then connect the LPC935 to the LPC922. See the Philips application note on the Flash Magic web page regarding ICP.

Title: Re: 89LPC936 ISP programming
Post by: sanjay on August 08, 2005, 07:56:26 AM
hi ,
i am also using 89lpc935 ,i am new in lpc series ,can u guide me
how to simulate lpc935  code using keil 2 since ,i am having
keil 2 but device is not supported
if u can answer me its very nice thing for me
awating for ur reply
sanjay
Title: Re: 89LPC936 ISP programming
Post by: Andy Ayre on August 08, 2005, 08:04:03 AM
It's probably better to ask your question on the forums at www.keil.com. This forum is for ISP questions, sorry...

Title: Re: 89LPC936 ISP programming
Post by: erikm on August 08, 2005, 02:00:12 PM
It would also help if YOu asked in English instead of Stupid Monkey ****

Erik