Print Page - LPC921 - Boot vector ?

Title: LPC921 - Boot vector ?
Post by: John D. Maniraj on July 07, 2005, 07:56:34 PM

Hello,

In the User Manual of P89LPC921, on page 111 it is mentioned that the boot vetor high address is 1Fh and the low address will always be 00, whereas FlashMagic menu for the LPC921 mentions the boot vector as 0x0F, which is the correct boot vector for this device.

Regards,
John.

Title: Re: LPC921 - Boot vector ?
Post by: Andy Ayre on July 07, 2005, 10:10:26 PM

It is 0FH. I think that is a cut and paste mistake in the datasheet.

Title: Re: LPC921 - Boot vector ?
Post by: John D. Maniraj on July 08, 2005, 09:06:43 PM

Thank you very much Andrew.

Regards,

John.

Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: John D. Maniraj on July 07, 2005, 07:56:34 PM